Home > Article > Content

How to check the refrigeration performance of a refrigerated trailer?

May 21, 2025

As a provider of refrigerated trailers, ensuring the optimal refrigeration performance of our products is of utmost importance. Refrigerated trailers play a crucial role in transporting temperature - sensitive goods such as food, pharmaceuticals, and certain chemicals. In this blog, I will share some key methods on how to check the refrigeration performance of a refrigerated trailer.

Pre - inspection Preparations

Before conducting a detailed refrigeration performance check, it is essential to carry out some preparatory work. First, visually inspect the trailer for any obvious physical damage. Check the exterior body for dents, scratches, or holes that could potentially lead to heat leakage. Inspect the door seals to ensure they are intact and in good condition. A damaged door seal can allow warm air to enter the trailer, putting extra strain on the refrigeration system.

Also, check the power supply of the refrigeration unit. If it is a diesel - powered unit, ensure that there is an adequate fuel supply. For electrically - powered units, make sure the connection to the power source is secure and that the power cable is undamaged.

Temperature Monitoring

One of the most direct ways to assess the refrigeration performance is through temperature monitoring. Install temperature sensors at multiple locations inside the trailer. These sensors should be placed at different heights and corners to get a comprehensive view of the temperature distribution.

Use a data logger to record the temperature readings over a period of time. Start by setting the desired temperature for the specific cargo that will be transported. For example, fresh produce might require a temperature range of 0 - 5°C, while frozen goods need to be kept at - 18°C or lower.

Let the refrigeration unit run for a sufficient period, usually at least 30 minutes to an hour, to allow the temperature inside the trailer to stabilize. Then, check the recorded temperature data. The temperature should be within the set range throughout the trailer. If there are significant temperature variations, it could indicate problems such as poor air circulation or a malfunctioning refrigeration system.

Airflow Inspection

Proper airflow is crucial for maintaining a uniform temperature inside the refrigerated trailer. Inspect the air vents and ducts to ensure they are not blocked. Blocked vents can disrupt the airflow pattern, leading to hot spots in some areas of the trailer.

Check the fans in the refrigeration unit. The fans are responsible for circulating the cold air throughout the trailer. Make sure they are running smoothly and at the correct speed. You can use a handheld anemometer to measure the air velocity at the vents. A lower - than - normal air velocity might suggest a problem with the fan or a blockage in the ductwork.

Also, examine the layout of the cargo inside the trailer. Incorrectly loaded cargo can obstruct the airflow. There should be sufficient space between the cargo and the walls, ceiling, and floor of the trailer to allow for proper air circulation. For instance, when loading pallets, ensure there are gaps between them to facilitate the movement of cold air.

Compressor and Condenser Check

The compressor is the heart of the refrigeration system. Check the compressor for any signs of abnormal noise or vibration. Unusual noises could indicate a mechanical problem, such as a worn - out bearing or a loose component. Vibration might also suggest an imbalance in the compressor.

Inspect the condenser coils. The condenser is responsible for releasing heat from the refrigeration system. Over time, the condenser coils can become dirty or clogged with dust, debris, or insects. A dirty condenser reduces the efficiency of the refrigeration system as it cannot dissipate heat effectively. Use a soft brush or compressed air to clean the condenser coils if necessary.

Check the refrigerant level in the system. Low refrigerant levels can lead to poor refrigeration performance. However, checking the refrigerant level is a more technical task that often requires specialized equipment. If you suspect a refrigerant leak or low refrigerant levels, it is advisable to contact a professional refrigeration technician.

Evaporator Inspection

The evaporator is another critical component of the refrigeration system. It absorbs heat from the inside of the trailer. Inspect the evaporator coils for frost buildup. Excessive frost on the evaporator coils can reduce the heat - transfer efficiency of the system.

If there is frost on the evaporator, check the defrost cycle of the refrigeration unit. The defrost cycle is designed to melt the frost on the evaporator coils at regular intervals. A malfunctioning defrost cycle can cause continuous frost buildup, leading to reduced refrigeration performance.

44

Also, examine the fan associated with the evaporator. Similar to the condenser fan, the evaporator fan is responsible for circulating air over the evaporator coils. Ensure that it is functioning properly and that the air is being distributed evenly inside the trailer.

Insulation Evaluation

Good insulation is essential for minimizing heat transfer into the refrigerated trailer. Check the insulation material inside the trailer for any signs of damage or degradation. Look for areas where the insulation might be compressed, torn, or missing.

You can perform a simple test by feeling the exterior of the trailer while the refrigeration unit is running. If certain areas feel unusually warm, it could indicate a problem with the insulation in that area. Additionally, you can use an infrared thermometer to measure the surface temperature of the trailer walls. Significant temperature differences across the walls might suggest insulation issues.

System Performance Testing

In addition to the component - level checks, it is also important to conduct a comprehensive system performance test. This can be done by simulating real - world operating conditions. For example, you can load the trailer with a representative amount of cargo and set the refrigeration unit to the desired temperature.

Monitor the power consumption of the refrigeration unit during the test. An increase in power consumption could indicate a problem with the system, such as a compressor working harder due to a refrigerant leak or a blocked condenser.

Measure the time it takes for the trailer to reach and maintain the set temperature. If it takes an unusually long time to cool down or if the temperature fluctuates significantly, it might be a sign of a malfunctioning refrigeration system.

Regular Maintenance and Records

To ensure long - term reliable refrigeration performance, regular maintenance is crucial. Develop a maintenance schedule that includes tasks such as cleaning the condenser and evaporator coils, checking the belts and hoses, and lubricating moving parts.

Keep detailed records of all inspections, maintenance activities, and any repairs. These records can help you track the performance of the refrigeration system over time and identify any recurring problems. They are also valuable for warranty claims and for demonstrating compliance with industry regulations.

At our company, we offer a wide range of high - quality refrigerated trailers, such as the 4 Axle Refrigerated Semi Trailer and 5 ton 10 ton refrigerated truck. Our trailers are designed with the latest refrigeration technology to ensure optimal performance and reliability.

If you are in the market for a refrigerated trailer or need assistance with checking the refrigeration performance of your existing trailer, we are here to help. Our team of experts can provide you with professional advice and support. Feel free to contact us to discuss your specific requirements and start a procurement negotiation.

References

  • ASHRAE Handbook - Refrigeration. American Society of Heating, Refrigerating and Air - Conditioning Engineers.
  • ISO standards related to refrigerated transport equipment. International Organization for Standardization.
  • Technical manuals provided by leading refrigeration unit manufacturers.
Send Inquiry